3.75" 4-JAW KEY CHUCK WITH INDEXING PLATE + CK-3.75Z-DJDD DOVETAIL JAWS PRE-MOUNTED, SCREW CHUCK+CK-3.75Z-SJ+CK-3.75Z-WJ+CK-3.75Z-PJ+CK-3.75Z-FJ5+CK-3.75Z-SS8+ IN ALU BOX M33X3.5

3.75" 4-JAW KEY CHUCK WITH INDEXING PLATE + CK-3.75Z-DJDD DOVETAIL JAWS PRE-MOUNTED, SCREW CHUCK+CK-3.75Z-SJ+CK-3.75Z-WJ+CK-3.75Z-PJ+CK-3.75Z-FJ5+CK-3.75Z-SS8+ IN ALU BOX M33X3.5

With range of optional accessories available as follows: 

CK-3.75Z-ALU ： CK-3.75Z-ALU ALUMINUM BOX FOR CK-3.75Z 

CK-3.75Z-BWJ ： CK-3.75Z-BWJ RIPPLE JAWS FOR CK-3.75Z 

CK-3.75Z-DJDD ： CK-3.75Z-DJDD DOVETAIL JAWS (DOVETAIL IN BOTH SIDES) FOR CK-3.75Z 

CK-3.75Z-DJDT ： CK-3.75Z-DJDT DOVETAIL JAWS (OUTSIDE DOVETAIL INSIDE THREAD) FOR CK-3.75Z

CK-3.75Z-EDJ ： CK-3.75Z-EDJ EXTENDED DOVETAIL JAWS WITH SQUARE HOLE FOR CK-3.75Z 

CK-3.75Z-FJ10 ： CK-3.75Z-FJ10 10" FLAT JAWS FOR CK-3.75Z 

CK-3.75Z-FJ5 ： CK-3.75Z-FJ5 5" FLAT JAWS FOR CK-3.75Z 

CK-3.75Z-FJ8 ： CK-3.75Z-FJ8 8" FLAT JAWS FOR CK-3.75Z 

CK-3.75Z-FP ： CK-3.75Z-FP FACE PLATE FOR CK CHUCK 

CK-3.75Z-IP ： CK-3.75Z-IP INDEXING PLATE FOR CK-3.75Z 

CK-3.75Z-JS130N ： CK-3.75Z-JS130N 130MM JUMBO JAWS FOR CK-3.75Z 

CK-3.75Z-JS75DT ： CK-3.75Z-JS75DT STEP JAWS FOR CK-3.75Z 

CK-3.75Z-PJ ： CK-3.75Z-PJ PIN JAWS FOR CK-3.75Z 

CK-3.75Z-PJB1 ： CK-3.75Z-PJB1 1" BULLDOG PIN JAWS FOR CK-3.75Z 

CK-3.75Z-PJSN ： CK-3.75Z-PJSN POWERGRIP JAW FOR CK-3.75Z 

CK-3.75Z-RJTT ： CK-3.75Z-RJTT ROUND JAWS (WITH TOOTH IN BOTH SIDES) FOR CK-3.75Z 

CK-3.75Z-SJ ： CK-3.75Z-SJ STEP JAWS FOR CK-3.75Z 

CK-3.75Z-WJ ： CK-3.75Z-WJ WIDE JAWS FOR CK-3.75Z 

CK-3.75Z-6017 ： CK-3.75Z-6017 LONG NOSED JAWS FOR CK-3.75Z 

* With Jaws interchangable with Vicmarc chuck 

Jaws for the CK-3.75Z are compatible with the following chucks: 

Vicmarc VM100, Record RP4000, Charnwood VIPER3, Rutlands Dakota XT700, Warco 9405, Craft Supplies CS400, Fox FX4000. 

(All listed chucks require our CK-JS8-M5 jaw fixing screws to be used)